Hioki PW3365-20 Clamp on Power Logger, designed for 50/60 Hz commercial line use, 3 circuits (1P2W), single circuit (1P3W, 3P3W, 3P4W), save data to the SD card continuously, clamp input, non-metallic contact voltage sensor, main unit only

• Measurement line & number of circuits 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels
• Voltage ranges 600 V AC (Effective measurement range: 90.00 V to 780.00 V)
• Current ranges 500.00 mA to 5.0000 kA AC (depends on current sensor in use), 50.000 mA to 5.0000 A AC (Leak clamp on sensor only)
• Power ranges 300.00 W to 9.0000 MW (depends on voltage/current combination and measured line type)
• Display update rate 0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication)
• Save destination SD memory card, or internal memory at real time
• Data save interval 1 sec to 30 sec, 1 minute to 60 minutes, 14 selections
• Save items Measurement value save: Average only / Average, Max./Min. value, [PW3360-21 only]: Harmonic data save: Average only / average, max./min. value in binary format, Screen copy: BMP form (saved every 5 min. at minimum interval time), Waveform save: Binary waveform data
• Functions Connection check, Quick Set navigation guide, clock, pulse input

More detailed specifications and dimensions of available models are specified in data sheet. Részletes információk