Főoldal DC tápegységek Aim-TTi DC tápegységek PC-s vezérlésű AIM-TTI_MX100QP Bench/System DC Power Supply, Multi-Range, Digital Control Quad Output, 4 x 35V/3A 420W, USB, RS232, LAN & GPIB Interfaces

AIM-TTI_MX100QP Bench/System DC Power Supply, Multi-Range, Digital Control Quad Output, 4 x 35V/3A 420W, USB, RS232, LAN & GPIB Interfaces

Ingyenes szállítás

AIM-TTI_MX100QP Bench/System DC Power Supply, Multi-Range, Digital Control Quad Output, 4 x 35V/3A 420W, USB, RS232, LAN & GPIB Interfaces

MX100Q Series

     
  • Four high performance outputs each with full functionality
  •  
  • Range switching gives variable voltage/current combinations
  •  
  • Shared power mode provides double power from a single output
  •  
  • Low output noise and ripple via linear final regulation
  •  
  • High setting resolution of up to 1mV and 0.1mA
  •  
  • Variable OVP and OCP trips on all outputs
  •  
  • 50 setting memories per output plus 50 linked memories
  •  
  • Numeric or spin-wheel control of all parameters
  • GPIB, RS-232, USB and LAN (LXI) interfaces (-P models)
  • Duplicate power & sense terminals at rear (-P models)
  • Individual or combined output on/off control with programmable delay sequencing.
  • 3U half-rack case for bench or rack mounting

 

Az egyes termékeknél feltüntetett leírások tájékoztató jellegűek. A H TEST a.s. nem vállal felelősséget a www.htest.hu és eshop.htest.hu oldalon lévő, esetlegesen előforduló hibákért, valamint pontatlanságokért – melyekért szíves elnézésüket kérjük. Pontos, részletes és érvényes leírások az adott termék/műszaki adatlapján találhatók, mely a gyártók honlapjáról tölthetők le. Részletes információk

bruttó ár kérésre
Elérhetőség Kérésre
Termékkód AIM-TTI_MX100QP

A termék a továbbiakban már nem elérhető

Részletes leírás AIM-TTI_MX100QP Bench/System DC Power Supply, Multi-Range, Digital Control Quad Output, 4 x 35V/3A 420W, USB, RS232, LAN & GPIB Interfaces

The MX Series represents a new generation of multiple output laboratory power supplies from Aim-TTi. Offering high power within a compact format they use ranged switched mixed-mode regulation with display and control via a large backlit graphic LCD with soft keys.

All outputs of an MX Series power supply have fully variable voltage and current setting and are able to operate in both constant voltage and constant current modes.  High resolution metering is incorporated and variable OVP and OCP trips are provided. Each output has its own DC On/Off switch.

 

To provide its impressive power density the MX series combines high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response.

The MX100 differs from most other triple/quad output power supplies in having three/four outputs of equal power, each with the ability to provide 35V at 3A. Each output features CV or CI operation, simultaneous high resolution metering, switchable remote sense, and an individual output switch.

   

Fel

Megjelenítésvideók és letöltések

Videók és letöltések AIM-TTI_MX100QP Bench/System DC Power Supply, Multi-Range, Digital Control Quad Output, 4 x 35V/3A 420W, USB, RS232, LAN & GPIB Interfaces

Fel

Megjelenítésrészletes információ

Tartozékok AIM-TTI_MX100QP Bench/System DC Power Supply, Multi-Range, Digital Control Quad Output, 4 x 35V/3A 420W, USB, RS232, LAN & GPIB Interfaces