Főoldal DC tápegységek GW Instek DC tápegységek GW Instek GPP-3060 385W-3-Channel, Programmable Linear D.C. Power Supply, USB+LAN

GW Instek GPP-3060 385W-3-Channel, Programmable Linear D.C. Power Supply, USB+LAN

Ingyenes szállítás

GW Instek GPP-3060 385W-3-Channel, Programmable Linear D.C. Power Supply, USB+LAN

     
  • Setting Resolution: 1mV/0.1mA; Read Back Resolution: 0.1mV/0.1mA
  • Low Ripple Noise: ≦1mVrms/≦2mArms
  • Transient Response Time: ≦100μS
  • Load Function (CC, CV, CR mode)
  • Tracking Series and Parallel Function without Additional External Wiring
  •  
  • Supports Setting Value, Measurement Value and Output Waveform Display
  •  
  • Sequential Output Function and Built-in 8 Template Waveforms
  • Provides 10 Sets of Memory for Each Sequence/Delay/Recorder/Panel Setting Condition
  • Intelligent Temperature Control Fan Effectively Reduces Noise
  • Standard: RS-232, USB, LAN, Ext I/O. Optional (manufacturer installed only): GPIB
  • Részletes információk

nettó ár € 1 009,00
bruttó ár € 1 281,43
 Kérjük, töltse ki a kötelező mezőket
Elérhetőség 4 hét
Termékkód GW_GPP-3060

Szavatosság 24 hónap

Részletes leírás GW Instek GPP-3060 385W-3-Channel, Programmable Linear D.C. Power Supply, USB+LAN

GPP-3060 and GPP-6030 triple-channel programmable DC power supplies are extension models of the GPP-X323 series. The maximum output power of these two models is 385W. GPP-3060 supports CH1/CH2: 0 ~ 30V / 0 ~ 6A output; GPP-6030 supports CH1/CH2: 0 ~ 60V / 0 ~ 3A output; CH3 of both models supports 1.8V, 2.5V, 3.3V, 5.0V/5A.

GPP-3060 and GPP-6030 inherit the high program resolution (1mV/0.1mA) and read back resolution (0.1mV/0.1mA) of the GPP series with low-ripple noise characteristics ≦1mVrms/≦ 2mArms and ≦100μs output transient recovery ability. An independent output on-off switch is provided for each channel.

For series and parallel applications of CH1 and CH2, the tracking function can automatically switch to series or parallel output without additional external wiring. Multiple display modes including single channel or multi-channel setting value, measurement value and waveform display to collocate with the built-in output monitoring function allow users to set the monitoring conditions according to their needs so as to generate an alarm or stop the output during the measurement process in order to stop the measurement and protect the customer's DUT.

Fel

Megjelenítésvideók és letöltések

Videók és letöltések GW Instek GPP-3060 385W-3-Channel, Programmable Linear D.C. Power Supply, USB+LAN

Méret 615.823 KB, Typ souboru: pdf Típus: pdf, Utolsó változás dátuma 05.10.2021

Fel

Megjelenítésrészletes információ